Vogelsang Corporation: Rollpins Dimensions - Metric ISO 8752 (formerly DIN 1481)

Home > Vogelsang Products > Rollpins > Dimensions - Metric ISO 8752 (formerly DIN 1481) - Heavy Duty

Dimensions - Metric ISO 8752 (formerly DIN 1481) - Heavy Duty

1) Pins with a nominal diameter of 10mm or greater may be delivered with one chamfer

2) d3 is smaller than d1 nominal

Dimensions in Millimeters

Diameter
Nominal Before
Insertion Chamfer
Length Wall
Thickness Recommended
Hole Size Double Shear
in kN (2)

d1 d2 (1) Min Max

Min Max a

Min Max s

1 1.2 1.3 0.8 0.15 0.35 0.2 0.7

1.5 1.7 1.8 1.1 0.25 0.45 0.3 1.58

2 2.3 2.4 1.5 0.35 0.55 0.4 2.0 2.1 2.82

2.5 2.8 2.9 1.8 0.4 0.6 0.5 2.5 2.6 4.38

3 3.3 3.5 2.1 0.5 0.7 0.6 3.0 3.1 6.32

3.5 3.8 4 2.3 0.6 0.8 0.75 3.5 3.65 9.06

4 4.4 4.6 2.8 0.65 0.85 0.8 4.0 4.15 11.24

4.5 4.9 5.1 2.9 0.8 1.0 1 4.5 4.65 15.36

5 5.4 5.6 3.4 0.9 1.1 1 5.0 5.15 17.54

6 6.4 6.7 4 1.2 1.4 1.2 6.0 6.15 26.04

8 8.5 8.8 5.5 2.0 2.4 1.5 8.0 8.25 42.76

10 10.5 10.8 6.5 2.0 2.4 2 10.0 10.25 70.16

12 12.5 12.8 7.5 2.0 2.4 2.5 12.0 12.3 104.1

Notes:

(1) For information only
(2) Double shear is only applicable to carbon and 420 stainless steel. Double shear is not applicable for 300 series stainless steel.

Pins 13 through 50 mm nominal diameter also available

Related Charts:

E-mail: vogelsang@rollpin.com | Phone: (732) 364-4422 | (800) 526-2376 | Fax: (732) 364-8111